ESP32 Addon Board Kit Wifi Backpack with a 3D Printed Case for Flipper Zero
70
Direct purchase from the factory 
सुरक्षित भुगतान
मुफ्त उपहार
शिपिंग नीति
रिटर्न नीतिमुफ्त उपहार
Roymall में आपका स्वागत है, प्रीमियम उपहार की आपकी दुकान। हम आपके समर्थन की सराहना करते हैं और आभार के रूप में हर खरीद पर मुफ्त उपहार प्रदान करते हैं। हमारे संग्रह को देखने के लिए तैयार हैं? हमारे चयन को ब्राउज़ करें, अपना ऑर्डर दें और अपने खरीद के साथ मुफ्त उपहार प्राप्त करें।शिपिंग नीति
हम ऑर्डर 2 दिन में संसाधित करते हैं।सामान्य शिपिंग समय 5-7 कार्य दिवस है।गंतव्य के आधार पर शिपिंग समय अलग हो सकता है।1. रिटर्न नीति
हम केवल roymall.com से खरीदल गइल आइटम स्वीकार करत बानी। मुफ्त उपहार रिटर्न ना कइल जा सके। रिटर्न कइल जाए वाला आइटम अप्रयुक्त और मूल पैकेजिंग में होन चाहीं।हम रिटर्न 3-5 कार्य दिवस में संसाधित करत बानी।कस्टम आइटम रिटर्न ना कइल जा सके।संपर्क करीं: service@roymall.com या Whatsapp: +86193598494712.धन वापसी नीति
रिटर्न आइटम मिले के बाद पूरा धन वापस मिली। शिपिंग लागत वापस ना मिली।संपर्क करीं: service@roymall.com या Whatsapp: +8619359849471
Description:
1. This is an addon board for the Flipper Zero multitool, providing Wifi functionality in a uniquily compact and covert formfactor. All kits are delivered with a 3D printed case using black PETG.
2. What makes it special: It comes in a unique "backpack" formfactor, hugging the Flipper snugly, fitting neatly in your pocket during operation. It also has a Micro-SD card slot to save captures or whatever else you can come up with.
3. Other than that it behaves like the FlipperZero wifi debugger module and all guides fitting that board also apply to this kit.
4. You can using an external antenna jack. (The external antenna one has the antenna connector fitted to the chip as well as a small jumper set) and the supplied 3D printed case. (The external antenna one obviously includes an antenna connector)
5. This project has a specific jumper set as well as a tiny antenna jack mounted on the board.
Note: This product does not include for Flipper Zero
Depending on the batch, the appearance of the electronic components on the board may be different from the picture, but the functions are the same and do not affect use.
Specifications:
Material: PCB+Electronic Components+PETG
Colour: Black
Package Contents:
1x Wifi Backpack - ESP32 Kit
1x 3D printed case
1x Wifi antennauff08Optional)
1. This is an addon board for the Flipper Zero multitool, providing Wifi functionality in a uniquily compact and covert formfactor. All kits are delivered with a 3D printed case using black PETG.
2. What makes it special: It comes in a unique "backpack" formfactor, hugging the Flipper snugly, fitting neatly in your pocket during operation. It also has a Micro-SD card slot to save captures or whatever else you can come up with.
3. Other than that it behaves like the FlipperZero wifi debugger module and all guides fitting that board also apply to this kit.
4. You can using an external antenna jack. (The external antenna one has the antenna connector fitted to the chip as well as a small jumper set) and the supplied 3D printed case. (The external antenna one obviously includes an antenna connector)
5. This project has a specific jumper set as well as a tiny antenna jack mounted on the board.
Note: This product does not include for Flipper Zero
Depending on the batch, the appearance of the electronic components on the board may be different from the picture, but the functions are the same and do not affect use.
Specifications:
Material: PCB+Electronic Components+PETG
Colour: Black
Package Contents:
1x Wifi Backpack - ESP32 Kit
1x 3D printed case
1x Wifi antennauff08Optional)
(The FlipperZero is not includes)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Electronics Ranking
